Radon Mitigation Methods

radon mitigation

There are several methods for radon mitigation. The most effective method is sub-membrane depressurization, which must be installed by a radon mitigation contractor. In this method, a reinforced plastic liner is placed over an earth floor and an air vent pipe and fan combination sucks radon from beneath the liner. In the process, the Radon specialists is expelled from the home.

How Much is a Radon Mitigation System?

Other methods of radon mitigation include inline fans. These fans are designed to operate with very low power, don’t create much noise, and can dramatically lower the radon concentration in your home. These systems are required in condos and apartments by the Department of Housing and Urban Development and the Department of Health and Human Services and the White House Council on Environmental Quality. To learn more about radon mitigation, contact a professional radon mitigation company in your area.

HRVs are effective for mitigating radon but produce significant amounts of heated air. The operating costs of HRVs are determined by utility rates and the amount of radon in the air. HRVs are suited for small spaces like basements, but they need to be cleaned annually and vented outside. Radon mitigation in water is less effective than aeration and requires careful disposal. However, the radiation emitted from the system is dangerous, and aeration, filtration, and granular activated carbon are effective solutions for water mitigation.

Testing radon levels is recommended before implementing a mitigation system, and every ten years after the system is installed. To ensure the effectiveness of a radon mitigation system, it is important to test the radon concentration in the home after two or three days. While a contractor can provide this service, it is best to get an independent third party to perform this test. The test should be conducted at night and should be repeated after two to seven days. Doors and windows should be closed for 12 hours before the test.

Leave a Reply

Your email address will not be published. Required fields are marked *